Sika® Latex / Latex Power
Sika® Latex Power is a synthetic rubber emulsion which when added to cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout.

Usage :
Rendering and Coatings
• Bonds rendering and coating layers
• Makes waterproof coating for tanks & pools for either fresh or sea water
• Ensures high wear resistance against erosion Jointing
• Long life and watertight masonry joints
• Concrete Repair & Adhesive Mortar
• Repair of spalling even on prestressed or reinforced concrete
• Bonding for plaster works by bond-coat
• Roof Finishing Adhesion and Hardener for Plaster Work
• Bonding of Concrete Casts
• Bonding between successive concrete casts by incorporating Sika® Latex into bonding mortar
• Used in bonding mortar for tiles & panellings
• Wet rendering of walls for weather proofing
• Injection into cracks or porous concrete works
• Tiling Waterproof Rendering & Cement Injection Mix Characteristics
• Adhesion to most substrates (concrete, stone, brick, ferrous metals, glass, ceramic tiles)
• Improves elasticity, flexibility and tensile strength
• Easy to use, non-toxic & plasticising mortar
• Inhibits cracking, improves surface hardening, limits wear and dust production
• Makes the mortar waterproof and reduces susceptability to acids and greases
• Mortar with Sika® Latex shows extremely good bonding to bases like concrete, stone, brick etc.
• Reduces viscosity of cement injection grout and improves bond of cured injected materials with substrates

Color
White (milky) liquid

Packaging : 250gm, 500 gm, 1 kg, 5 kg, 10 kg , 20 kg, 50 kg and 100 kg container

Sika® Plasocrete Super
Water reducing and waterproofing admixture for all types of concrete and mortar. Conforms to IS 9103-1999,IS 2645-1975 and ASTM C-494-86TypeA

Usage
Sika® Plasocrete Super is recommended for use in structural and mass concrete, particularly for the following:
• Roof slab casting
• DPC
• Beams
• Columns
• Water tanks
• Culverts
• Tunnels
• Sewerage works
• Virtually wherever watertight concrete is required Also used in:
• Internal and external plaster of buildings etc.
• Repair and renovation

Characteristics
Sika® Plasocrete Super provides the following beneficial properties :
• Compatible with all varieties of Portland cement including Slag Cement.
• Required at a very small dosage hence convenient to handle and greater economy
• Improves water tightness to a great extent.
• Reduced shrinkage, better finish
• Improves workability without increased water content
• Rebound loss is low
• No added chloride- does not attack reinforcement

Color
Dark brown liquid

Packaging : 500gm, 1kg, 5kg, 10kg, 20kg, 100 kg

Sika® Hibond.
Epoxy based, two component structural bonding agent. Sika® Hibond compiles with ASTM 881 – 87 Type II Grade 2 Class B and C.

Usage
Sika® Hibond is a structural bonding agent applied between old and new concrete surfaces during casting of roof slabs, retaining walls, water tanks, columns,extension of balconies, etc

Characteristics
• Long pot life and open time allows sufficient time for placement of new concrete.
• Can be applied on moist surface also.
• Once the two components of the material is mixed the material must be used within approx 4 hours.

Color
• Part A: White liquid
• Part B: Blackish brown liquid

Packaging : 600g System
• Part A: 400g
• Part B: 200g

Sika® Rustop
Sika® Rustop is cement bound synthetic resin modified 2-component coating for corrosion protection on reinforcement and concrete. Ideally suited to rehabilitate corroded reinforcement.

Usage
• Protects new or old reinforcement steel in construction from corrosion
• Ideal for protecting reinforcements with insufficient cover or in thin sections
• Protects embedded steel in repairable structures from further corrosion after rehabilitation
• Protects concrete against the action of Calcium Chlorides and de-icing salts

Characteristics
• Impervious anticorrosive coating to prevent ingress of water, chlorides and carbon dioxide
• Excellent adhesion to steel, concrete and mortar
• Good bonding for subsequent concrete or mortars due to cementitious base • Contains corrosion inhibitors
• For structures under repair or rehabilitation the corroded surfaces rust must be cleaned t using Sika® Rustoff 100
• Easy to use

Color
• Comp A : White free flow lump free liquid
• Comp B : Green free flow powder

Packaging
1.25kg system, 2.50 kg system
Sika® Rustoff 100
Sika® Rustoff 100 is a single component liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat.

Usage
Sika® Rustoff 100 removes rust and prevents further rusting of:
• New or old reinforcement steel in construction
• Embedded steel in repairable structures
• Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc.
• Ball bearings, valves, tools etc.
• Ideal for protecting reinforcements with insufficient cover or in thin sections

Characteristics
• Removes rust
• Prevents further rusting by providing a passivating coat
• To be applied with brush, cotton waste swab or spray gun on the affected metal surface
• Easy to apply since it is in liquid form
• For repairable structures when applied with brush /spray gun can reach even the most difficult rusted areas with congested reinforcements

Color : Clear liquid
Packaging : 250g, 500g, 1kg, 5kg, 20kg

Sika Noleek
Powder based waterproofing cum water reducing concrete and mortar admixture

Usage
Sika® Noleek is recommended for use in structural and mass concrete, particularly for the following:
• Roof slab casting
• DPC
• Beams
• Columns
• Water tanks
• Culverts
• Tunnels
• Sewerage works
• Virtually wherever watertight concrete is required

Characteristics
• Compatible with all varieties of Portland Cement including Slag Cement.
• Easy to use
• Effective pore filler to prevent water seepage
• Easy compaction resulting in denser concrete
• Reduced shrinkage, better finish
• Rebound loss is low
• No added chloride- does not attack reinforcement
• Supplied in consumer friendly pack

Color : White fine powder
Packaging : 1kg

SikaCim®
Liquid integral water reducing cum waterproofing admixture for all types of concrete and mortar Conforms to IS 2645-1975 .

Usage
Sikacim® is recommended for use in structural and mass concrete, particularly for the following
• Casting of roof slabs
• DPC
• Beams
• Columns
• Water tanks
• Culverts
• Tunnels
• Sewerage works
• Virtually wherever watertight concrete is required
• Excellent for internal and external plaster of buildings etc.
• Repair and renovation

Characteristics
• Compatible with all varieties of Portland Cement including Slag Cement
• Minimises loss of mortar due to rebound in plastering jobs, hence great ease of application and saving
• Required at a very small dosage, hence economical
• Improves water tightness to a great extent
• Performs multiple roles of water reducer as well as waterproofer

• Improves workability without increased water content
• Reduced shrinkage, better finish
• Acts to disrupt the leakage causing capillary structures formed in concrete to cause leakages
• No added chloride thus not contributing to corrosion of steel
• Convenient to handle since suitable for both concrete and mortar
• Supplied in consumer friendly pack

Color : Brown liquid
Packaging : 200g,1kg,5kg,10kg,20kg

Sika® Raintite
Sika® Raintite is a multifunctional polymer emulsion for enhancing the properties of mortar/ concrete / grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties.

Usage
• Waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades, etc.
• As a bonding agent for uses in repair and plastering
• For making polymer mortar for repairs mortars etc.
• Treatment for leaching and salt petre action
• Multipurpose mortar admixture for injection grouts
• Additive to cement based paints for waterproofing

Characteristics
• Improved impermeability against water ingress
• Extremely good bonding to moist substrates, extremely improved mechanical, flexural strength and abrasion resistance properties
• UV resistant & suitable for external coating
• When used as an additive to cement based paint improves impermeability, water repellency and anti fungal property of the painted surface (site trials are always advised before application for shade variations, if any)
• Sika® Raintite can be diluted with water (1 : Nil to 1 : 4) depending on the type of application
• Screed required with Sikacim®/ Sika® Plastocrete Super to protect waterproofing layer

Color : Milky white liquid
Packaging : 250g, 500g, 1kg, 5kg, 10kg and 20kg.

Sika®-Tilogrout It is a gap filling material between different wall and floor tiles like ceramic, glazed, vitrified, mosaic, glass mosaic and marble tiles etc.

Usage
Sika® Tilogrout is a gap filling material between different wall and floor tiles like ceramic, glazed, vitrified, mosaic, glass mosaic and marble tiles etc.

Characteristics
• Cementitious, only water to be added
• Available in standard Sika shades
• Resistant to dust penetration
• Can withstand mild floor cleaning agents (depends on actual chemical composition and concentration)
• Waterproof
• Excellent bond with tiles
• Easy to Clean
Color : Ivory, white, black, grey, sky blue, burgundy, copper brown, mushroom, lavender, cream, blue, green
Packaging : 500g, 1kg